Feynlab Industrial Degreaser 500ml | Water-Borne Heavy Grease & Oil Cleaner
Professional use. Open to purchase, no trade account needed.
Feynlab® Industrial Degreaser is a ready-to-use, water-borne degreaser for heavy grease, oil and industrial build-up on construction equipment, agricultural machinery and vehicles. It is Step 1 in Feynlab's Industrial Prep System, used before Industrial Re-Set.
How it works
Feynlab describes a water-borne cleaning system built around citrus-derived surfactants rather than a strong solvent blend. In general terms, surfactants lift oil and grease off a surface and hold it in the water so it rinses away. Feynlab says the formula is VOC-exempt and thick enough to cling to vertical surfaces, which gives it longer dwell time and means less scrubbing.
Approved surfaces
Per Feynlab: painted metal, powder-coated components, construction equipment panels, vehicle frames and undercarriages, agricultural machinery, steel and aluminium equipment, and rubber tracks and tyres.
How to use (Feynlab's published method)
Hand application: spray directly onto the contaminated area, let it dwell without drying, then pressure rinse. Repeat for heavy contamination, then follow with Industrial Re-Set.
Foam cannon: fill the cannon with product at full strength, apply the foam, allow dwell time, rinse, then follow with Industrial Re-Set.
Specifications
Size: 500ml bottle, ready to use. Chemistry (per Feynlab): water-borne, citrus-derived surfactants, VOC-exempt. Role: Step 1 in the Feynlab Industrial Prep System, used before Industrial Re-Set.
Before you use it
Feynlab does not publish a pH, ingredient list or dilution rate for this product on its product page, so check the label and safety data sheet before use. Wear gloves and eye protection, as you would with any degreaser.
Chemistry and performance descriptions above are Feynlab's own. The glove and eye protection note is our general safety advice.
Next step in Feynlab's system: Feynlab Industrial Re-Set.