Labocosmetica FIERO | Coating Prep Finishing Polish | Removes Light Swirls, Bonds Coating
Labocosmetica FIERO — Coating Prep Finishing Polish
Fiero is the finishing polish that doubles as your coating primer — and it solves the wait that slows every coating job. It's water-based, wax- and silicone-free, with no resins or fillers, so it leaves a pure, defect-free, deep-gloss finish instead of a temporary fill. On sensitive paint it's a standalone finishing polish; on hard or ceramic paint, paired with AUDACE, it's a two-step correction.
The clever part is the chemistry: Fiero uses Self-Assembled Monolayer (S.A.M.) technology to leave the surface ready to bond a nanoceramic coating immediately — no 6-to-12-hour wait for resins to gas off like traditional primers. It's IPA-resistant and compatible with UV-lamp-cured coatings, so the gloss you finish with is the gloss that stays.
KEY FEATURES & BENEFITS
- S.A.M. technology. Leaves a self-assembled monolayer that bonds your coating straight away — stronger adhesion, no curing wait between polish and coat.
- No fillers, no fakery. Resin-, filler- and wax-free: a true finish on both soft and hard paint, with deep gloss.
- Coat immediately. Skips the 6–12 hour bond time traditional primers need — apply your nanoceramic coating right after finishing.
- IPA- and UV-lamp-resistant. Holds its finish through panel wipes and UV-cured coatings.
DIRECTIONS
- With a random orbital, spread evenly at a constant speed 4.5 over a 40×40 cm area until the primer is used up.
- Recommended pad: medium-soft yellow or soft black.
SDS (Safety Data Sheet)