
Koch Chemie P6.02 One Cut & Finish | Cut 6.0, Gloss 8.0 | One-Step Polish with Carnauba Sealant
Koch Chemie One Cut & Finish P6.02 | High-Gloss Polish with Sealant
Koch Chemie One Cut & Finish P6.02 is a machine polish for the permanent removal of polishing haze, holograms and scratches, and sanding marks from P2000 grit, with a sealing effect in the same step. Homogeneous abrasives leave a brilliant, durable high-gloss finish, and the balance of abrasiveness and gloss makes it an economical one-step for vehicle preparation.
Read This Before You Coat
P6.02 contains carnauba wax and non-volatile silicones. That is what gives it the sealing effect, and it is why this is a finish-and-protect polish, not a prep polish for a ceramic coating. For coating prep use the silicone-free ProfiLine polishes (H9.02, F6.01, M3.02, M2.02).
Cut & Gloss Rating
Cut Level: 6.0
Gloss Level: 8.0
KEY FEATURES & BENEFITS
- Cut, Finish & Seal in One Step – Correction and protection from a single product
- Removes P2000 Sanding Marks – Plus polishing haze, holograms and scratches
- Homogeneous Abrasives – Brilliant, durable high gloss
- Economical – Easy to polish, easy to wipe off
DIRECTIONS
- Shake before use.
- Spread five pea-sized drops evenly on a Koch Chemie One Cut Pad.
- Distribute over the surface at the lowest machine speed, then polish crosswise with medium pressure. Koch Chemie recommends a high-performance eccentric with at least a 15 mm stroke, or a forced-rotation eccentric.
- Wipe off residue with a clean, soft microfibre towel.
Precautions: Do not apply to hot surfaces. Do not use on painted plastics or rubber. Keep a dedicated pad for this polish. Check for suitability and compatibility before use. Protect from frost and excessive heat.
SPECIFICATIONS
- Cut Level: 6.0
- Gloss Level: 8.0
- Contains: Carnauba wax and non-volatile silicones
- Removes: P2000 marks, haze, holograms, scratches
- Pad: One Cut Foam Pad
- Size: 250 mL (Art. 469250)








