Take Now FLYCOLOR 2 Handheld Detailing Light
Take Now FLYCOLOR 2 handheld detailing light: a compact, rechargeable inspection light for checking paint before, during and after correction.
General overhead lighting often won't show swirls, holograms or coating high spots. A handheld light held at a low angle to the panel shows them up. This one has two brightness levels, 250 and 500 lumens, from a COB LED with a CRI of 96+, and switches between three colour temperatures (2700K, 4500K and 6500K), so you can check the same panel under warm, neutral and daylight-type light.
It's cordless and rechargeable. The handle adjusts through 180° and there's a hook for hanging it, so you can set the light where you need it and keep both hands on the machine. Rated IP65 for weather and IK07 for impact.
Use it for
- Checking each pass during paint correction
- Finding high spots while levelling a ceramic coating
- Colour matching paint and trim
- Final inspection before handover
How to use
Hold the light at a shallow angle to the panel and sweep it across. Switch colour temperature to see the same defects under different light. A full charge takes about 4 hours.
Key points
- Output: 250 / 500 lumens (COB LED)
- CRI: 96+
- Colour temperature: 2700K / 4500K / 6500K
- Battery: 3.7V 2600mAh Li-ion, about 2 hours run time, 4 hours to charge
- Size: 190 × 56 × 36 mm
- Weight: 305 g
- Ratings: IP65 weatherproof, IK07 impact
Pairs with our compounds and polishes and ceramic coatings.