MIRCH Typhon Surge | Strip Wash

MIRCH Typhon Surge | Strip Wash

MIRCH Typhon Surge is a high-powered, biodegradable alkaline strip wash engineered to break through old waxes, sealants, and heavy surface buildup - resetting paintwork safely and effectively for correction or fresh protection.

Formulated with a balanced working pH of ~10, Typhon Surge delivers serious cleaning strength without relying on harsh builders such as sodium hydroxide. This allows it to dissolve traffic film, embedded grime, and residual protection layers while remaining safer for plastics, trims, and surrounding materials over repeated use.

Its advanced surfactant system actively lifts contamination and rinses completely clean, ensuring residue is removed rather than dragged back across the surface. There are no oily films, no trim hazing, and no unwanted surface drag - just a properly cleansed finish ready for polishing, coating, or reapplication of protection.

Typhon Surge is highly versatile and can be used as a foaming pre-wash to strip protection before contact washing, or as a powerful main wash in a bucket when deeper cleaning is required. Whether you’re preparing for paint correction or simply removing old layers before starting fresh, it gives you a clean slate without unnecessary aggression.

Built for moments when the reset matters most - Typhon Surge clears the surface, removes the past, and prepares the way forward.

KEY FEATURES & BENEFITS

• Strips Waxes, Sealants & Build-Up
  Breaks down old protection layers, traffic film, and embedded grime to reveal a clean, bare surface.

• Balanced Alkaline Formula (pH ~10)
  Strong enough to reset paintwork without the risks associated with overly aggressive alkaline cleaners.

• Biodegradable, Safer Chemistry
  Free from harsh additives like sodium hydroxide - safer for trims, plastics, and long-term maintenance.

• Rinses Clean with No Residue
  Leaves no oily films, haze, or drag - ideal for correction prep or fresh protection application.

• Flexible Application Options
  Suitable for foam cannon pre-wash stripping or bucket wash contact cleaning.

DIRECTIONS

Foam Cannon Application

1. Dilute approximately 1:8 for foam cannon use.

2. Apply foam evenly over the vehicle.

3. Allow to dwell for 2–4 minutes. Do not allow to dry.

4. Rinse thoroughly with high-pressure water.

Bucket Wash Application

1. Add 15–30mL to a 10–15L wash bucket.

2. Activate suds with water pressure.

3. Wash using the two-bucket method, panel by panel.

4. Rinse thoroughly.

Important Notes

• Always use on cool surfaces and out of direct sunlight.

• Do not allow the product to dry on the vehicle.

• Ideal for decontamination, correction prep, or protection reset washes.

SPECIFICATIONS

• Product Type: Alkaline Strip Wash

• pH Level: ~10

• Application Methods: Foam cannon or bucket wash

• Function: Strips waxes, sealants, and heavy surface buildup