Maniac Line BLACK & WRAP Shampoo

Maniac Line Black & Wrap Shampoo 

Premium Care for Dark and Wrapped Cars

Black and matte-painted cars, as well as vehicles with wraps or Paint Protection Films (PPFs), demand special care to maintain their elegance and protect against visible imperfections. Maniac Line Black & Wrap Shampoo is specifically formulated to clean, protect, and rejuvenate these finishes, offering a gentle yet powerful solution.

This 2-in-1 shampoo not only washes but also revitalises your car’s appearance, eliminating dirt, limescale microfilms, and the dulling grey look that can develop over time. With advanced anti-limescale action and deep-cleaning properties, it’s the perfect choice for maintaining glossy, matte, or wrapped surfaces.

Maniac Line Black & Wrap Shampoo is the ultimate detailing solution for dark, matte, or wrapped vehicles, ensuring a deep clean, vibrant finish, and effective protection every time.

KEY BENEFITS

• 2-in-1 Formula: Cleans and restores, enhancing shine or protecting matte finishes.
• Anti-Limescale Technology: Prevents water spots during drying with mineral chelating agents.
• Gentle and Safe: Suitable for glossy, matte, and wrapped surfaces, as well as vehicles with nano coatings.
• High Lubrication: Creates a slippery surface to prevent swirls and scratches during washing.
• Deep Cleaning: Removes even persistent dirt while rejuvenating paint and protective films.
• Cost-Effective: High dilution ratio of up to 1:300 for economical use.

DIRECTIONS

Preparation:

1. Ensure the car is parked in the shade, and the surface is cool to the touch.
2. Prewash the vehicle with Maniac Line Foam Gun Prewash to remove loose dirt.

Washing:

1. Dilution: Add 4 caps of Black & Wrap Shampoo to 8L of water (1:300 ratio). Use a two-bucket method—one for the shampoo solution and another for rinsing.
2. Use a microfibre wash mitt or sponge, such as Maniac Line’s Double Face Mitt, to clean one panel at a time.
3. Start from the top of the car and work downward, ensuring thorough coverage without letting the shampoo dry on the surface.
4. Rinse your mitt or sponge frequently in the clean water bucket to avoid scratching the paint.

Rinsing and Drying:

1. Rinse the vehicle thoroughly with high-pressure water, ensuring all shampoo residue is removed.
2. For drying, use an ultra-absorbent microfibre cloth like the Super Dryer. Use one cloth for the bodywork and another for glass to prevent streaks and scratches.
3. Fold the cloth when drying lower panels to avoid picking up dirt from the ground.

RECOMMENDATIONS

• For particularly dull or dirty surfaces, apply a small amount of undiluted shampoo directly to a damp mitt and work it into the area before rinsing.
• Always work methodically, panel by panel, for the best results.

DILUTION

• Bucket Washing: 1:300 (4 caps of shampoo in 8L of water).
• Spot Cleaning: Apply undiluted to heavily soiled areas with a damp mitt.

FAQ

Does Black & Wrap Shampoo contain wax?

No. Because it would polish a matte surface. The product guarantees anti-lime scale protection that allows the water to slide quickly off: in a single step, the car will be purified and protected to prevent the formation of lime scale.

SDS (Safety Data Sheet)

Download the Safety Data Sheet (SDS) for BLACK & WRAP here