Koch Chemie M2.02 Micro Cut | Cut 2.5, Gloss 9.0 | Silicone-Free Anti-Hologram Finishing Polish
Koch Chemie Micro Cut M2.02 | Ultra-Fine Anti-Hologram Finishing Polish
Koch Chemie Micro Cut M2.02 is the finest finishing polish in the Koch Chemie range — a latest-generation machine micro-polish for the permanent removal of polishing haze, holograms, fine scratches and sanding marks from P4000 grit on all paint systems, including scratch-resistant clears. Its highly specialised, extremely homogeneous abrasives leave a brilliant, lasting high-gloss finish that holds up under inspection lighting, even on dark and sensitive colours.
M2.02 or M3.02?
Both are silicone-free finishing polishes with a Gloss Level of 9.0. M3.02 (Cut 3.2) refines P3000 marks and is the everyday final step after compounding. M2.02 (Cut 2.5) is finer again — the jeweling step for soft, dark or show-car paint where you want the last trace of haze gone and the highest clarity the range can give.
True Correction, Not Concealment
Holograms and haze are removed mechanically, not hidden under fillers or glaze. What you see after the wipe-down is the real finish — and it stays that way after the first wash.
Cut & Gloss Rating
Cut Level: 2.5 — the finest abrasive in the Koch Chemie polish range.
Gloss Level: 9.0 — mirror clarity for the final stage.
KEY FEATURES & BENEFITS
- Permanent Hologram & Haze Removal – Mechanically eliminates polishing haze, holograms and fine scratches
- P4000 Refinement – Clears ultra-fine sanding marks to a flawless finish
- Silicone-Free, Filler-Free – True gloss, not masked defects
- Safe on Scratch-Resistant Clears – All paint systems, including dark and sensitive shades
- Economical & Easy – Long work time, residue-free wipe-off
DIRECTIONS
- Shake well before use.
- Spread the polish evenly over a Koch Chemie Micro Cut Pad and work it in at the lowest speed with the machine on the panel.
- Polish crosswise under medium pressure until a clear, transparent film appears. Koch Chemie recommends a high-performance eccentric (dual-action) polisher with at least a 15 mm stroke — forced rotation preferred.
- Wipe residue with a clean, soft microfibre cloth for a hologram-free finish.
Precautions: Do not apply to hot surfaces or in direct sunlight. Not for painted plastics or rubber. Use a dedicated pad for each polish — do not mix pads between products. Check for suitability and compatibility before use. Protect from frost and excessive heat.
SPECIFICATIONS
- Cut Level: 2.5
- Gloss Level: 9.0
- Formula: Silicone-free, filler-free
- Refines: P4000 marks, holograms, polishing haze, fine scratches
- Areas of Use: All paint systems, including scratch-resistant
- Pad Compatibility: Micro Cut Pad / soft finishing pads
- Sizes: 250 mL (Art. 468250) · 1 L (Art. 468001)