Labocosmetica AUDACE | Heavy Cut Compound | Silicone-Free, DA & Rotary Compatible
Labocosmetica AUDACE — Heavy Cut Compound
Audace is the heavy-cutting compound for when the defect is deeper than a polish can reach. It's water-based and silicone-free, built around new-generation abrasives and Labocosmetica's Cold Cut Technology — which is the part that matters: it does its cutting at low speed (1200 rpm on a rotary, speed 4.5 on a random orbital), so the abrasive removes the defect rather than heat doing the work. Less heat means fewer holograms, less risk on the panel, and a cleaner result.
It cuts deep and accurate — enough for extra-hard and new-generation ceramic clearcoats, and sandpaper marks up to 1000 grit — yet finishes down to a medium polish, so you're not fighting a hazy mess afterward. Pair it with FIERO and most cars are a tidy two-step correction.
KEY FEATURES & BENEFITS
- Cold Cut Technology. Cuts at low speed (1200 rpm rotary / speed 4.5 orbital), so you get correction without the heat that causes holograms — and the cutting power of a far more aggressive compound.
- Serious cut, medium finish. Handles ceramic-hard paint and sanding marks up to 1000 grit, then leaves a medium-polish surface that refines easily.
- Water-based, silicone-free. No fillers hiding defects, no residue on trim, low VOC and odourless.
- Two-step system. With FIERO as the finishing primer, you correct and prep for coating in two passes.