MIRCH Kraken | SiO₂ Infused Foaming Car Wash

MIRCH Kraken | SiO₂ Infused Foaming Car Wash

MIRCH Kraken is a high-performance SiO₂ infused foaming wash and sealant designed to deliver fast, touchless protection with minimal effort. Applied through a foam cannon, Kraken coats, clings, and rinses away - leaving behind real ceramic-style protection without the need to touch the surface.

Built on the same silica backbone as MIRCH KING and Hydra, Kraken has been re-engineered specifically for foaming application. As the foam dwells and rinses, SiO₂ precursors bond to paint and exterior surfaces, forming a thin, flexible silica layer that dramatically lowers surface energy. The result is tight water beading, rapid sheeting, enhanced gloss, and a slick finish more commonly associated with dedicated ceramic sealants.

Application couldn’t be simpler. Foam it on after washing, allow a short dwell time, then rinse clean. There’s no towel contact, no levelling, and no complicated prep - just consistent protection that locks in shine and makes ongoing maintenance easier.

Despite the effortless application, Kraken delivers serious performance. The protective layer actively repels water, reduces grime adhesion, and provides weeks to months of protection, even under real-world driving conditions. Used as a standalone protectant or as part of a coating maintenance routine, Kraken is ideal for detailers and enthusiasts who want speed without sacrificing results.

KEY FEATURES & BENEFITS

• Touchless SiO₂ Protection
  Foaming application delivers ceramic-style protection without wiping or surface contact.

• Strong Hydrophobics & Gloss Enhancement
  Creates tight water beading, fast sheeting, and a slick, high-gloss finish.

• Fast & Effortless Application
  Foam on, dwell briefly, rinse off - no levelling, curing, or complex steps.

• Weeks to Months of Protection
  Leaves behind a durable silica layer that resists water, dirt, and road grime.

• Safe on All Exterior Surfaces
  Suitable for paint, clear coat, trims, plastics, and coated vehicles.

DIRECTIONS

1. Wash and rinse the vehicle thoroughly before application.

2. Dilute Kraken 1:10 in a foam lance (e.g. 100 mL product to 900 mL water).

3. Apply foam evenly over all exterior surfaces while the vehicle is still wet.

4. Allow the foam to dwell for 30 seconds to 1 minute - do not allow to dry.

5. Rinse thoroughly using high-pressure water, working bottom-up, then top-down.

6. Dry the vehicle using a drying towel or blower as normal.

Do not apply in direct sunlight or to hot panels.
For best results, use after a full wash or decontamination stage to maximise bonding and clarity.

SPECIFICATIONS

• Product Type: SiO₂ Infused Foaming Wash & Sealant

• Application Method: Foam Cannon

• Dilution Ratio: 1:10

• Protection Duration: Weeks to months

• Finish: High gloss, hydrophobic

• Surface Compatibility: All exterior vehicle surfaces